This mailer allows you to send mail messages directly into Usenet style news networks. Any local message directed to an address of news.group.usenet will be fed into the news network for the news.group newsgroup. fax If you have the HylaFAX software installed, this mailer will allow you to direct email to it so that you may build an email-fax gateway. This feature is experimental at the time of writing and more information may be obtained from http://www.vix.com/hylafax/. There are others, such as the pop, procmail, mail11, phquery, and cyrus that are useful, but less common. If your curiosity is piqued, you can read about these in the sendmail book or the documentation supplied in the source package. Configure mail routing for local hosts The Virtual Brewery’s configuration is probably more complex than most sites require. Most sites today would use the SMTP transport only and do not have to deal with UUCP at all. In our configuration we’ve configured a smart host that is used to handle all outgoing mail. Since we are using the SMTP transport on our local network we must tell sendmail that it is not to send local mail via the smart host. The LOCAL_NET_CONFIG macro allows you to insert sendmail rules directly into the output sendmail.cf to modify the way that local mail is handled. We’ll talk more about rewrite rules later on, but for the moment you should accept that the rule we’ve supplied in our example specifies that any mail destined for hosts in the vbrew.com domain should be delivered directly to the target hosts using the SMTP mail transport. Prev Home Next Overview of Configuration Files Up Generating the sendmail.cf File
Note: If you are looking for good and high quality web space to host and run your application check Lunarwebhost Cheap Web Hosting services
where name is substituted with the feature name. Some features take one optional parameter. If you wish to use something other than the default, you should use an entry that looks like: FEATURE(name, param) where param is the parameter to supply. Local macro definitions The standard sendmail macro configuration files provide lots of hooks and variables with which you can customize your configuration. These are called local macro definitions. Many of them are listed in the CF file in the sendmail source package. The local macro definitions are usually invoked by supplying the name of the macro with an argument representing the value you wish to assign to the variable the macro manages. Again, we’ll explore some of the more common local macro definitions in the examples we present later in the chapter. Defining mail transport protocols If you want sendmail to transport mail in any way other than by local delivery, you must tell it which transports to use. The MAILER macro makes this very easy. The current version of sendmail supports a variety of mail transport protocols; some of these are experimental, others are probably rarely used. In our network we need the SMTP transport to send and receive mail among the hosts on our local area network, and the UUCP transport to send and receive mail from our smart host. To achieve this, we simply include both the smtp and uucp mail transports. The local mail transport is included by default, but may be defined for clarity, if you wish. If you are including both the smtp and the uucp mailers in your configuration, you must always be sure to define the smtp mailer first. The more commonly used transports available to you using the MAILER macro are described in the following list: local This transport includes both the local delivery agent used to send mail into the mailbox of users on this machine and the prog mailer used to send messages to local programs. This transport is included by default. smtp This transport implements the Simple Mail Transport Protocol (SMTP), which is the most common means of transporting mail on the Internet. When you include this transport, four mailers are configured: smtp (basic SMTP), esmtp (Extended SMTP), smtp8 (8bit binary clean SMTP), and relay (specifically designed for gatewaying messages between hosts). uucp The uucp transport provides support for two mailers: uucp-old, which is the traditional UUCP, and uucp-new, which allows multiple recipients to be handled in one transfer. usenet
Note: If you are looking for good and high quality web space to host and run your application check Lunarwebhost PHP Web Hosting services
include: OSTYPE(`linux’) This is probably the most important definition. The OSTYPE macro causes a file of definitions to be included that are good defaults for your operating system. Most of the definitions in an OSTYPE macro file set the pathnames of various configuration files, mailer program paths and arguments, and the location of directories sendmail uses to store messages. The standard sendmail source code release includes such a file for Linux, which would be included by the previous example. Some Linux distributions, notably the Debian distribution, include their own definition file that is completely Linux-FHS compliant. When your distribution does this, you should probably use its definition instead of the Linux default one. The OSTYPE definition should be one of the first definitions to appear in your sendmail.mc file, as many other definitions depend upon it. DOMAIN The DOMAIN macro is useful when you wish to configure a large number of machines on the same network in a standard way. It you’re configuring a small number of hosts, it probably isn’t worth bothering with. You typically configure items, such as the name of mail relay hosts or hubs that all hosts on your network will use. The standard installation contains a directory of m4 macro templates used to drive the configuration process. This directory is usually named /usr/share/sendmail.cf or something similar. Here you will find a subdirectory called domain that contains domain-specific configuration templates. To make use of the DOMAIN macro, you must create your own macro file containing the standard definitions you require for your site, and write it into the domain subdirectory. You’d normally include only the macro definitions that were unique to your domain here, such as smart host definitions or relay hosts, but you are not limited to these. The sendmail source distribution comes with a number of sample domain macro files that you can use to model your own. If you saved your domain macro file as /usr/share/sendmail.cf/domain/vbrew.m4, you’d include definitions in your sendmail.mc using: DOMAIN(`vbrew’) FEATURE The FEATURE macro enables you to include predefined sendmail features in your configuration. These sendmail features make the supported configurations very simple to use. There are a large number, and throughout this chapter we’ll talk about only a few of the more useful and important ones. You can find full details of the features available in the CF file included in the source package. To use any of the features listed, you should include a line in your sendmail.mc that looks like: FEATURE(name)
Note: If you are looking for good and high quality web space to host and run your application check Lunarwebhost Linux Web Hosting services
# end If you compare and contrast the two configurations, you might be able to work out what each of the configuration parameters does. We’ll explain them all in detail. Typically Used sendmail.mc Parameters A few of the items in the sendmail.mc file are required all the time; others can be ignored if you can get away with defaults. The general sequence of the definitions in the sendmail.mc is as follows: 1. VERSIONID 2. OSTYPE 3. DOMAIN 4. FEATURE 5. Local macro definitions 6. MAILER 7. LOCAL_* rulesets We’ll talk about each of these in turn in the following sections and refer to our examples in Example 18-1 and Example 18-2, when appropriate, to explain them. Comments Lines in the sendmail.mc file that begin with the # character are not parsed by m4, and will by default be output directly into the sendmail.cf file. This is useful if you want to comment on what your configuration is doing in both the input and output files. To allow comments in your sendmail.mc that are not placed into the sendmail.cf, you can use the m4 divert and dnl tokens. divert(-1) will cause all output to cease. divert(0) will cause output to be restored to the default. Any output generated by lines between these will be discarded. In our example, we’ve used this mechanism to provide a comment that appears only in the sendmail.mc file. To achieve the same result for a single line, you can use the dnl token that means, literally, starting at the beginning of the next line, delete all characters up to and including the next newline. We’ve used this in our example, too. These are standard m4 features, and you can obtain more information on them from its manual page. VERSIONID and OSTYPE VERSIONID(`@(#)sendmail.mc 8.9 (Linux) 01/10/98′) The VERSIONID macro is optional, but is useful to record the version of the sendmail configuration in the sendmail.cf file. So you’ll often encounter it, and we recommend it. In any case, be sure to
Note: If you are looking for good and high quality web space to host and run your application check Lunarwebhost Unix Web Hosting services
divert(-1) # # Sample configuration file for vstout - smtp only # divert(0) VERSIONID(`@(#)sendmail.mc 8.7 (Linux) 3/5/96′) OSTYPE(`linux’) # # Include support for the local and smtp mail transport protocols. MAILER(`local’) MAILER(`smtp’) # FEATURE(rbl) FEATURE(access_db) # end A sendmail.mc file for vstout at the Virtual Brewery is shown in Example 18-2. vstout uses SMTP to talk to all hosts on the Brewery’s LAN, and you’ll see the commonality with the generic SMTP-only configuration just presented. In addition, the vstout configuration sends all mail for other destinations to moria, its Internet relay host, via UUCP. Example 18-2. Sample Configuration File vstout.uucpsmtp.m4 divert(-1) # # Sample configuration file for vstout # divert(0) VERSIONID(`@(#)sendmail.mc 8.7 (Linux) 3/5/96′) OSTYPE(`linux’) dnl # moria is our smart host, using the “uucp-new” transport. define(`SMART_HOST’, `uucp-new:moria’) dnl # Support the local, smtp and uucp mail transport protocols. MAILER(`local’) MAILER(`smtp’) MAILER(`uucp’) LOCAL_NET_CONFIG # This rule ensures that all local mail is delivered using the # smtp transport, everything else will go via the smart host. R$* < @ $* .$m. > $* $#smtp $@ $2.$m. $: $1 < @ $2.$m. > $3 dnl # FEATURE(rbl) FEATURE(access_db)
Note: If you are looking for good and high quality web space to host and run your application check Lunarwebhost Unix Web Hosting services
Linux Network Administrators Guide Prev Chapter 18. Sendmail Next The sendmail.cf and sendmail.mc Files The m4 macro processor program generates the sendmail.df file when it processes the macro configuration file provided by the local system administrator. Throughout the remainder of this chapter we will refer to this configuration file as the sendmail.mc file. The configuration process is basically a matter of creating a suitable sendmail.mc file that includes macros that describe your desired configuration. The macros are expressions that the m4 macro processor understands and expands into the complex sendmail.cf syntax. The macro expressions are made up of the macro name (the text in capital letters at the start), which can be likened to a function in a programming language, and some parameters (the text within brackets) that are used in the expansion. The parameters may be passed literally into the sendmail.cf output or may be used to govern the way the macro processing occurs. A sendmail.mc file for a minimal configuration (UUCP or SMTP with all nonlocal mail being relayed to a directly connected smart host) can be as short as 10 or 15 lines, excluding comments. Two Example sendmail.mc Files If you’re an administator of a number of different mail hosts, you might not want to name your configuration file sendmail.mc. Instead, it is common practice to name it after the host vstout.m4 in our case. The name doesn’t really matter as long as the output is called sendmail.cf. Providing a unique name for the configuration file for each host allows you to keep all configuration files in the same directory and is just an administrative convenience. Let’s look at two example macro configuration files so we know where we are heading. Most sendmail configurations today use SMTP only. It is very simple to configure sendmail for SMTP. Example 18-1 expects a DNS name server to be available to resolve hosts and will attempt to accept and deliver all mail for hosts using just SMTP. Example 18-1. Sample Configuration File vstout.smtp.m4
Note: If you are looking for good and high quality web space to host and run your application check Lunarwebhost PHP Web Hosting services
Linux Network Administrators Guide Prev Chapter 18. Sendmail Next Overview of Configuration Files Traditionally, sendmail was set up through a system configuration file (typically called /etc/mail/sendmail.cf, or in older distributions, /etc/sendmail.cf, or even /usr/lib/sendmail.cf ) that is not anything close to any language you’ve seen before. Editing the sendmail.cf file to provide customized behavior can be a humbling experience. Today sendmail makes all configuration options macro driven with an easy-to-understand syntax. The macro method generates configurations to cover most installations, but you always have the option of tuning the resultant sendmail.cf manually to work in a more complex environment. Prev Home Next Installing sendmail Up The sendmail.cf and sendmail.mc Files
Note: If you are looking for good and high quality web space to host and run your application check Lunarwebhost Cheap Web Hosting services
Linux Network Administrators Guide Prev Chapter 18. Sendmail Next Installing sendmail The sendmail mail transport agent is included in prepackaged form in most Linux distributions. Installation in this case is relatively simple. Despite this fact, there are some good reasons to install sendmail from source, especially if you are security conscious. The sendmail program is very complex and has earned a reputation over the years for containing bugs that allow security breaches. One of the best known examples is the RTM Internet worm that exploited a buffer overflow problem in early versions of sendmail. We touched on this briefly in Chapter 9. Most security exploits involving buffer overflows rely on all copies of sendmail on different machines being identical, as the exploits rely on data being stored in specific locations. This, of course, is precisely what happens with sendmail installed from Linux distributions. Compiling sendmail from source yourself can help reduce this risk. Modern versions of sendmail are less vulnerable because they have come under exceedingly close scrutiny as security has become a more widespread concern throughout the Internet community. The sendmail source code is available via anonymous FTP from ftp.sendmail.org. Compilation is very simple bceause the sendmail source package directly supports Linux. The steps involved in compiling sendmail are: # cd /usr/local/src # tar xvfz sendmail.8.9.3.tar.gz # cd src # ./Build You need root permissions to complete the installation of the resulting binary files using: # cd obj.Linux.2.0.36.i586 # make install You have now installed the sendmail binary into the /usr/sbin directory. Several symbolic links to the sendmail binary will be installed into the /usr/bin/ directory. We’ll talk about those links when we discuss common tasks in running sendmail. Prev Home Next Sendmail Up Overview of Configuration Files
Note: If you are looking for good and high quality web space to host and run your application check Lunarwebhost PHP Web Hosting services
How Does Mail Routing Work? Up Sendmail
Note: If you are looking for good and high quality web space to host and run your application check Lunarwebhost Cheap Web Hosting services
Linux Network Administrators Guide Prev Chapter 18. Sendmail Next The sendmail.cf and sendmail.mc Files The m4 macro processor program generates the sendmail.df file when it processes the macro configuration file provided by the local system administrator. Throughout the remainder of this chapter we will refer to this configuration file as the sendmail.mc file. The configuration process is basically a matter of creating a suitable sendmail.mc file that includes macros that describe your desired configuration. The macros are expressions that the m4 macro processor understands and expands into the complex sendmail.cf syntax. The macro expressions are made up of the macro name (the text in capital letters at the start), which can be likened to a function in a programming language, and some parameters (the text within brackets) that are used in the expansion. The parameters may be passed literally into the sendmail.cf output or may be used to govern the way the macro processing occurs. A sendmail.mc file for a minimal configuration (UUCP or SMTP with all nonlocal mail being relayed to a directly connected smart host) can be as short as 10 or 15 lines, excluding comments. Two Example sendmail.mc Files If you’re an administator of a number of different mail hosts, you might not want to name your configuration file sendmail.mc. Instead, it is common practice to name it after the host vstout.m4 in our case. The name doesn’t really matter as long as the output is called sendmail.cf. Providing a unique name for the configuration file for each host allows you to keep all configuration files in the same directory and is just an administrative convenience. Let’s look at two example macro configuration files so we know where we are heading. Most sendmail configurations today use SMTP only. It is very simple to configure sendmail for SMTP. Example 18-1 expects a DNS name server to be available to resolve hosts and will attempt to accept and deliver all mail for hosts using just SMTP. Example 18-1. Sample Configuration File vstout.smtp.m4
Note: If you are looking for good and high quality web space to host and run your application check Lunarwebhost PHP Web Hosting services